top of page
Get Quotation

Working Condition of Diesel Engine – CRDI - 4 stroke Engine

Price

₹300,000.00

  • Technical Specification :
    1. The device should be designed based on latest technology diesel engines with Common rail direct fuel injection system.
    2. The trainer should be able to simulate engine start up, speedup, slowdown and other actions so as to illustrate the structure and working principle of CRDI engines.
    3. The Engine should be 4 Cylinder, turbocharged with inter cooler diesel. Aluminium engine head and cast iron block.
      3.1 Displacement: 1500 - 2500 CC
      3.2 Maximum Power: 70 - 110 HP
      3.3 Ignition & Fuel System: Common Rail Direct Injection
      3.4 Cooling System: Water Cooling
      3.5 Fuel Tank: 10 Liter with fuel gauge
      3.6 Engine Specification board – suitable for engine
    4. Real and operating CRDI Diesel engine, illustrating the structure and working process.
    6. Engine management circuit diagram with wiring colour code and internal diagram of the ECU with part listing and naming should be printed on to Colour printed board base.
    7. Test points should be provided on the printed base so that different voltages/current, resistance values etc. can tested/understood using a Multimeter.
    8. Automobile meters should be fitted on to the training module along with the printed circuit diagram, to demonstrate engine speed, temperature, fuel pressure, charging light etc.,
    9. The training module should be fitted with diagnostic socket (DLC) for universal automobile decoder (Scan tool) to read fault codes, clear fault codes and read data stream.
    10. Fault setting switch bank should be provided to induce faults in the training module to Set, demonstrate and diagnosis the line break, grounding short circuit, improper contact or open circuit faults can be induced, user can adjust the number and type of faults.
    11. Diagnostic reader should be attached to the model to display the error codes.
    12. Good working condition engine should be provided with fuel tank and battery. Throttle control is provided on the module to accelerate.
    13. The training module should be fabricated using steel pipe frame with spray painted for good looks and the entire setup is provided with caster wheels with brakes for easy movement of the same.
    14. The model should be equipped with colour circuit diagram of engine management system and its external connection and parts, so that the trainees can easily identify the wiring connections to different sensors and actuators.
    15. The model should be mounted on to sturdy iron frame with caster wheels with brake so that the model can be easy to carry from one place to another place.
    16. The CRDI engine should be equipped with DLC Socket, to connect the scan tool for diagnosis and fault codes, live data stream reading.
    17. Fault setting switch bank is provided along with the engine so that the trainees can create troubles and check the reaction of the engine and diagnosis the problem and rectify.

Quantity

bottom of page